HTS heading
7226Flat-rolled products of other alloy steel, of a width of less than 600 mm:
Rates as published in 2026 HTS Revision 15, captured 2026-08-13. Source: USITC Harmonized Tariff Schedule.
Current duty rates (17 lines)
| Code | Description | General | Special | Column 2 |
|---|---|---|---|---|
| 7226.11.10.00 | Of a width of 300 mm or more | Free | — | 28% |
| 7226.11.90 | Of a width of less than 300 mm | Free | — | 33% |
| 7226.19.10.00 | Of a width of 300 mm or more | Free | — | 28% |
| 7226.19.90.00 | Of a width of less than 300 mm | Free | — | 33% |
| 7226.20.00.00 | Of high-speed steel | Free | — | 37% |
| 7226.91.05.00 | Of chipper knife steel | Free | — | 34% |
| 7226.91.15 | Of a width of 300 mm or more | Free | — | 29% |
| 7226.91.25 | Of a width of less than 300 mm | Free | — | 34% |
| 7226.91.50.00 | Of a thickness of 4.75 mm or more | Free | — | 28% |
| 7226.91.70.00 | Of a width of 300 mm or more | Free | — | 28% |
| 7226.91.80.00 | Of a width of less than 300 mm | Free | — | 33% |
| 7226.92.10 | Of a width of 300 mm or more | Free | — | 0.4¢/kg + 29% |
| 7226.92.30 | Of a width of less than 300 mm | Free | — | 34% |
| 7226.92.50.00 | Of a width of 300 mm or more | Free | — | 0.4¢/kg + 28% |
| 7226.92.70 | Of a thickness not exceeding 0.25 mm | Free | — | 33% |
| 7226.92.80 | Of a thickness exceeding 0.25 mm | Free | — | 33% |
| 7226.99.01 | Other | Free | — | 33% |
Get an email when 7226 changes
We diff the full schedule nightly. One code is free.
One code, free, no card. Unsubscribe from any email.
Rate change history
Change history is temporarily unavailable. This is a display problem on our side, not a statement that nothing changed.
Federal Register actions
Temporarily unavailable — not a statement that none exist.