HTS heading
7208Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
Rates as published in 2026 HTS Revision 15, captured 2026-08-13. Source: USITC Harmonized Tariff Schedule.
Current duty rates (18 lines)
| Code | Description | General | Special | Column 2 |
|---|---|---|---|---|
| 7208.10.15.00 | Pickled | Free | — | 0.4¢/kg + 20% |
| 7208.10.30.00 | Of a thickness of 4.75 mm or more | Free | — | 20% |
| 7208.10.60.00 | Of a thickness of less than 4.75 mm | Free | — | 20% |
| 7208.25.30.00 | Of high-strength steel | Free | — | 20% |
| 7208.25.60.00 | Other | Free | — | 0.4¢/kg + 20% |
| 7208.26.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | — | 0.4¢/kg + 20% |
| 7208.27.00 | Of a thickness of less than 3 mm | Free | — | 0.4¢/kg + 20% |
| 7208.36.00 | Of a thickness exceeding 10 mm | Free | — | 20% |
| 7208.37.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | — | 20% |
| 7208.38.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | — | 20% |
| 7208.39.00 | Of a thickness of less than 3 mm | Free | — | 20% |
| 7208.40.30 | Of a thickness of 4.75 mm or more | Free | — | 20% |
| 7208.40.60 | Of a thickness of less than 4.75 mm | Free | — | 20% |
| 7208.51.00 | Of a thickness exceeding 10 mm | Free | — | 20% |
| 7208.52.00.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | — | 20% |
| 7208.53.00.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | — | 20% |
| 7208.54.00.00 | Of a thickness of less than 3 mm | Free | — | 20% |
| 7208.90.00.00 | Other | Free | — | 20% |
Get an email when 7208 changes
We diff the full schedule nightly. One code is free.
One code, free, no card. Unsubscribe from any email.
Rate change history
Change history is temporarily unavailable. This is a display problem on our side, not a statement that nothing changed.
Federal Register actions
Temporarily unavailable — not a statement that none exist.